09-26-2018 01:38 AM
Dear Team,
We have complete setup running ISE 2.2 version of TACACS for our network device administration.Is there any way to integrate Linux Server to the TACACS authentication server.(Only for authentication not authorization)...
If there are steps or guides please advice the setup.
THanks much,
Ganesh B
Solved! Go to Solution.
09-26-2018 04:38 AM
The Google machine says this:
https://serverfault.com/questions/425020/authenticate-linux-sshd-with-tacacs-cisco-acs
Should be similar for ISE. The ISE side is setup the same as any other TACACS client that is just doing authentication. Don't worry about command sets or custom profiles, just permit whatever AD groups you want to connect.
09-26-2018 04:38 AM
The Google machine says this:
https://serverfault.com/questions/425020/authenticate-linux-sshd-with-tacacs-cisco-acs
Should be similar for ISE. The ISE side is setup the same as any other TACACS client that is just doing authentication. Don't worry about command sets or custom profiles, just permit whatever AD groups you want to connect.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide