Integration of ACS with RSA
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
05-30-2012 10:05 AM - edited 03-10-2019 07:08 PM
HI
I am Puneet Gupta.We have Nexus7009 at client network but due to limitaion of Nexus switches that they can not be directly integrate Nexus with RSA so client has purchased cisco ACS for the AAA.
We are able to do the authenication and autorization via ACS.However clients wants to further intigrate the ACS with RSA so that authenication should happen via RSA and authorzation should happen ACS.
Is that possible ? if yes, how can i configure the ACS ?
Regrads
Puneet Gupta
- Labels:
-
AAA
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
05-30-2012 02:00 PM
Hello Puneet
Yes it's possible. You have to create the "sdconf.rec" file in RSA specifying the IP addresses of the ACS. Then you can import that file into ACS. This is the initial step to get ACS and RSA talk to each other. Later you can configure the authentication and authorization policies. Are you using ACS 4.x or ACS 5.x ?
Here's the screenshot of ACS 5.x when adding the RSA "sdconf.rec". Please rate if it helps
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
05-30-2012 11:09 PM
Hi
Thanks a ton for the inforamtion.I have already add the RSA in ACS 5.2 and i am able to login in nexus switches by the users which are created in RSA.
However i am not able to set the autorization policy for those users.I am just able to login via RSA users and not able to anything else.
So my question is how can i set the authorization policy for users craeted in RSA?
ACS version 5.2
Nexus7009 Switches
Reagrds
Puneet Gupta
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
11-15-2012 08:19 AM
I'm in having the same problem.
ACS version is 5.1
Any help would be appreciated.
Thanks,
Joe
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
11-15-2012 03:30 PM
Hello Joe. I guess you'have already integrated ACS with RSA but you want to create some policies.
What are the authorization policies you want to create ?
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
11-24-2012 08:03 PM
Hi Joe
has you problem been resolved .If not please let me know what exactly you want to configure in ACS ?
