cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
716
Views
0
Helpful
1
Replies

IPv6 Scenario, Cisco ISE 2.6 is not lookup Active Directory Computer or Domain

Dear Expert,

 

We have IPv6 scenario and Implicated ISE 2.6 and integrated Windows Server 2019 Domain Controller.

NAD is also added. While authenticating Computer and User with dot1x protocol, User is authenticated, but computer is not authenticating. As per error such no user. 

 

Kindly help me. 

 

Regards, 

Chandra Shekhar

+91 9312705165 

1 Accepted Solution

Accepted Solutions

Jason Kunst
Cisco Employee
Cisco Employee
you will need to provide much more information on configurations and screens, its not trivial, you should also check out our prescriptive wired and wireless guide, https://cs.co/ise-guides

please be aware that windows supplicant doesn't allow machine auth in the user space and user auth in the machine space. Does computer work by itself?
Does both work fine with ipv4?

here is a nice article, some partners out there like to do machine auth only, you will see in other posts
https://www.networkworld.com/article/2940463/machine-authentication-and-user-authentication.html

View solution in original post

1 Reply 1

Jason Kunst
Cisco Employee
Cisco Employee
you will need to provide much more information on configurations and screens, its not trivial, you should also check out our prescriptive wired and wireless guide, https://cs.co/ise-guides

please be aware that windows supplicant doesn't allow machine auth in the user space and user auth in the machine space. Does computer work by itself?
Does both work fine with ipv4?

here is a nice article, some partners out there like to do machine auth only, you will see in other posts
https://www.networkworld.com/article/2940463/machine-authentication-and-user-authentication.html
Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: