09-30-2013 03:54 AM - edited 03-10-2019 08:57 PM
Hi,
Currently in ISE deployment , we have 2 ISE nodes with 1.1.1.268 version with latest patch,
ISE nodes hold following personas
Node1 : Admin, Monitoring , PSN
Node 2 : PSN
How will above deplyoment should be upgrade to 1.2 ?
In which order they should be upgraded ? Any supporting doc covering above deployment for ISE 1.2 upgrade .
09-30-2013 07:23 AM
First, you should capture backups.
Once that is done, you want to ensure that you are using the latest patch for v1.1.1 (patch 5).
From there, you can do a direct upgrade to v1.2. You want to upgrade Node 1 first.
You can use this document to help in your upgrade. Chapter 1 helps with the initial upgrade of Node 1 and Chapter 2 covers Node 2.
http://www.cisco.com/en/US/docs/security/ise/1.2/upgrade_guide/b_ise_upgrade_guide.pdf
Hopefully this answers you question.
Please rate Helpful posts and mark question as answered if this does, in fact, answer the question.
Charles Moreton
09-30-2013 10:59 AM
Please check the below link for ISE 1.1.x to 1.2 upgrade:
Link-1
http://www.cisco.com/en/US/docs/security/ise/1.2/upgrade_guide/b_ise_upgrade_guide.pdf
09-30-2013 04:40 PM
Kindly check the following links for references
http://www.cisco.com/en/US/docs/security/ise/1.2/release_notes/ise12_rn.pdf
http://www.cisco.com/en/US/docs/security/ise/1.2/upgrade_guide/b_ise_upgrade_guide_chapter_01.pdf
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide