03-30-2015 04:52 AM - edited 03-12-2019 05:45 PM
We are running cisco ISE 1.2, we have new AD domain with forest trust relation between both the new and the old. authentication to with the new domain fails.
Is there any requirements or configurations change needs to be done to make it success?
03-30-2015 05:49 AM
In ISE 1.2, you have to place the domain in front of the username for authentication:
DOMAIN\username
While acknowledging that this is a less than useful workaround, the Multi Domain logins are much streamlined in ISE 1.3. If you have a current SmartNet, you can upgrade at no cost.
Please Rate Helpful posts and mark this question as answered if, in fact, this does answer your question. Otherwise, feel free to post follow-up questions.
Charles Moreton
03-30-2015 06:50 AM
we have shared support, not smartnet, so it will not be a free upgrade?
03-30-2015 07:03 AM
A support contract should do it. Log in here and see if you can download it:
03-30-2015 08:13 AM
I am asking about license only
03-30-2015 08:16 AM
Use the license that is currently on your ISE. If your account has access to download the software, then you are good. The license will not change during the upgrade. If you are using ISE 1.2 Patch 8 or above, then you are using the same Base/Plus?Apex Licensing model.
If you are not yet on Patch 8, the you are using Base/Advanced and these will be converted during the upgrade.
Please Rate Helpful posts and mark this question as answered if, in fact, this does answer your question. Otherwise, feel free to post follow-up questions.
Charles Moreton
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide