ISE 1.3 Load Balancing

[Emerson Rodrigues]

Hello,

I've got 4x ISE appliance, 2x Administration and 2x PSN

1 Administration primary / Monitoring secondary

2 Policy Service Node

3 Administration secondary / Monitoring Primary

4 Policy Service Node

Both PSN's are in the same Node Group... ISE is working fine, but it's not load balancing profiling, Corp WLAN is getting profiled by PSN 2 and guest WLAN is getting profiled by PSN 4... Is there a way to make both WLAN's to get profiled by random PSN? Like a load Balancer?

BR,

Emerson

[nspasov]

Hi Emerson-

Do you have a load balancer? If you do you can load balance the sessions between the ISE nodes located in the node group. If not you could do Anycast based profiling. Check this link out that goes over all of the different options that you have:

http://www.alcatron.net/Cisco%20Live%202013%20Melbourne/Cisco%20Live%20Content/Security/BRKSEC-3040%20%20Advanced%20ISE%20and%20Secure%20Access%20Deployment.pdf

I hope this helps!

Thank you for rating helpful posts!