Hi
we are introducing Cisco ISE 2.2 to a new environment where all access switches are C2960. I was looking for the best compatible IOS that supports ISE and I found that Cisco recommends 12.2(55) SE10. I already have upgraded the switches to 12.2(55) SE11.
I am wondering if it is better to use IOS 15.0.2-SE10a (which is recommended by Cisco for C2960-S) as it supports device-sensor feature.
Or it is more stable to stick with Cisco validated IOS for lanbase switches to avoid crashes and performance issues.
please advise...
Supported Cisco Access Switches
|
|
|
|
|
|
|
|
|
|
|
|
|
|
IE2000
IE3000
|
IOS 15.2(2)E4
|
√
|
√
|
√
|
√
|
√
|
√
|
√
|
√
|
|
IOS 15.0(2)EB
|
√
|
√
|
√
|
√
|
X
|
√
|
√
|
√
|
|
CGS 2520
|
IOS 15.2(3)E3
|
√
|
√
|
√
|
√
|
X
|
√
|
√
|
√
|
|
IOS 15.2(3)E3
|
√
|
√
|
√
|
√
|
X
|
√
|
√
|
√
|
|
Catalyst 2960 LAN Base
|
IOS 12.2(55)SE10
|
√
|
√
|
√
|
√
|
X
|
√
|
√
|
X
|
|
IOS v12.2(55)SE5
|
√
|
√
|
√
|
√
|
X
|
√
|
√
|
X
|
|
Catalyst 2960-S
|
IOS 15.0.2-SE10a
|
√
|
√
|
√
|
√
|
√
|
√
|
√
|
X
|
|
IOS 12.2.(55)SE5
|
√
|
√
|
√
|
√
|
√
|
√
|
√
|
X
|
the following "show version":
BlockA_SW1#sh ver
Cisco IOS Software, C2960 Software (C2960-LANBASEK9-M), Version 12.2(46)SE, RELEASE SOFTWARE (fc2)
Copyright (c) 1986-2008 by Cisco Systems, Inc.
Compiled Thu 21-Aug-08 15:59 by nachen
Image text-base: 0x00003000, data-base: 0x01200000
ROM: Bootstrap program is C2960 boot loader
BOOTLDR: C2960 Boot Loader (C2960-HBOOT-M) Version 12.2(46r)SE2, RELEASE SOFTWARE (fc1)
BlockA_SW1 uptime is 46 weeks, 6 days, 4 hours, 51 minutes
System returned to ROM by power-on
System restarted at 09:08:45 UTC Mon May 23 2016
System image file is "flash:/c2960-lanbasek9-mz.122-46.SE/c2960-lanbasek9-mz.122-46.SE.bin"
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
export@cisco.com.
cisco WS-C2960-48PST-L (PowerPC405) processor (revision B0) with 61440K/4088K bytes of memory.
Processor board ID FOC1321Z25Q
Last reset from power-on
1 Virtual Ethernet interface
48 FastEthernet interfaces
4 Gigabit Ethernet interfaces
The password-recovery mechanism is enabled.
64K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address : 00:26:0A:08:3C:00
Motherboard assembly number : 73-11882-05
Power supply part number : 341-0266-02
Motherboard serial number : FOC132139L8
Power supply serial number : DCA1313H3V7
Model revision number : B0
Motherboard revision number : A0
Model number : WS-C2960-48PST-L
System serial number : FOC1321Z25Q
Top Assembly Part Number : 800-30874-01
Top Assembly Revision Number : B0
Version ID : V01
CLEI Code Number : COMWH10CRA
Hardware Board Revision Number : 0x01
Switch Ports Model SW Version SW Image
------ ----- ----- ---------- ----------
* 1 52 WS-C2960-48PST-L 12.2(46)SE C2960-LANBASEK9-M
