01-14-2018 03:41 PM
Hi,
I have installed ISE 2.3, but one of the 3595 appliance is stuck on Application Server Initializing satate and not proceeding to running status.
DNS , Time zone and NTP settings were changed and this issue started. This node was a primary node, then I changed it to secondary, but issue was still there. Then I re installed this node and the other primary node, but issue still not resolved. I have changed it to PSN and issue is still there. I have used application stop ise and application start ise commands, but issue is not resolved.
Please let me know if this is a bug or if some one knows the resolution. Thanks
Solved! Go to Solution.
01-15-2018 04:50 PM
Thanks for your help guys,
This issue has been resolved by re-setting the configuration.
#application reset configuration ise
In ISE Gui node was showing unregistered, but when use
#sh tech-support
it was showing still as a secondary PAN.
Take care.
01-15-2018 08:47 AM
How did you “reinstall” the node? Just curious what steps you took.
01-15-2018 10:14 AM
If not already done, please engage Cisco TAC. As George said, we need to know exactly what is done and when, and check various system and application logs on the ISE nodes.
01-15-2018 04:50 PM
Thanks for your help guys,
This issue has been resolved by re-setting the configuration.
#application reset configuration ise
In ISE Gui node was showing unregistered, but when use
#sh tech-support
it was showing still as a secondary PAN.
Take care.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: