cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
566
Views
0
Helpful
2
Replies

ISE 2.3 context visibility - accessing and searching extremely slow

KelvinT
Level 1
Level 1

Hello,

 

For whatever reason ISE 2.3 3495 is extremely slow when accessing context visibility.  All other page works fine.  Except for when we filtered a identity group endpoint.

 

We tried chrome and firefox.  We also downloaded the latest flash.

Any idea?

1 Accepted Solution

Accepted Solutions

howon
Cisco Employee
Cisco Employee

1. If using VM, make sure the ISE nodes have enough CPU/RAM

2. Also make sure the CPU/RAM is reserved and not shared

3. Install latest patch

4. If problem perisits, the suggest opening TAC SR

View solution in original post

2 Replies 2

howon
Cisco Employee
Cisco Employee

1. If using VM, make sure the ISE nodes have enough CPU/RAM

2. Also make sure the CPU/RAM is reserved and not shared

3. Install latest patch

4. If problem perisits, the suggest opening TAC SR


@howon wrote:

1. If using VM, make sure the ISE nodes have enough CPU/RAM

2. Also make sure the CPU/RAM is reserved and not shared

3. Install latest patch

4. If problem perisits, the suggest opening TAC SR


I agree with what Hosuk said but ISE 2.3 has been slow. It still requires flash. https://community.cisco.com/t5/identity-services-engine-ise/java-in-ise/td-p/3903820 Its also not a recommended release.

 

ISE 2.4 added more resources to MNT as well if needed (this all depends on your resource issues that TAC can discuss with you)

https://community.cisco.com/t5/identity-services-engine-ise/ise-super-mnt-question/td-p/3889396

 

I would recommend also move to ISE 2.6 as the recommended release

https://community.cisco.com/t5/security-news/announcing-ise-2-6-as-suggested-release/ba-p/3953488

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: