ISE 2.6 add Endpoint via Policy Result to EndpointGroup

[ThomasKohb]

Hey,

i have a WLAN Pol. match via Called-Station-ID ..this Endpoints  must  add to an specific Endpoint group via Result Profil.

in the advanced atributes i found GuestAccess:UpdEPIdentityGroup  Atribut .. i set this to the Name of the ID-Group the Endpoints shuld add ... but the Endpoint add to unnown Group... 

wrong Atribute? 

[ahollifield]

Not sure what you are looking to accomplish here.  See: https://community.cisco.com/t5/security-documents/how-to-ask-the-community-for-help/ta-p/3704356

and: https://www.cisco.com/c/en/us/products/collateral/security/identity-services-engine/bulletin-c25-2503911.html

[Marcelo Morais]

Hi @ThomasKohb ,

 at Context Visibility > Endpoints > click your Endpoint MAC Addr > at Attributes > take a look at the Attributes that you are able to use.

Hope this helps !!!

[ThomasKohb]

Hey,

what you mean is manuel adding to group... i will dynamicly add a endpoint,   condition is  WLAN-SSID , to the endpoint Group

do you know what i mean? 

Device is join WLAN SSID: Test  .. client do  aaa request  to ise... ise put the client in group  from policy result ?