ISE 3315 stuck in INIT Entering runlevel: 3

[Guillaume BARBEROT]

Hello

my ISE 3315 is stuck in

ISE 3315 stuck in INIT Entering runlevel: 3

when i connect a screen and keyboard i can only see this last message :

ISE 3315 stuck in INIT Entering runlevel: 3

There is nothing after, i cannot login (no prompt) even after waiting 20 minutes with this message

I have no char return via serial cable depsite i was able to run initial setup from console (same cable, the DB9-DB9 provided, same serial config, same laptop)

really strange

Version ADE :  ADE-OS-2.0 (2.6.18-238.1.1.el5PAE)

Version ISE : 1.1.0.665

Any idea ?

Thanks

Guillaume

[Guillaume BARBEROT]

Finally it worked ... after more than 1 hour ... (went out for lunch) !

ISE seams really slow on the 3315 servers

[komsakchim]

Good to heard that.

For me, I still stuck on this page after 15 mins. I will wait for 1 and half hour. >_<"

[Guillaume BARBEROT]

Hello,

for me i can say it is too slow if you don't have a DNS and a NTP server accessible from the ISE.

It is requested to have both servers during initial setup, and with that, it is running faster (let's say 30 minutes to do all initial setup ...)

Hope it helps !

[david.tran]

this is also a "me too" comment.  I set up two 3395 ISE and they are both very slow, when upgrading from 1.1.1 to 1.1.2, took about 45 minutes for the upgrade.  Furthermore, upgrading the ISE to patch-5, a 14MB file, took about 45 minutes for ISE to patch and getting it back to function properly.