10-25-2017 07:15 AM
Hi All,
I am running ISE 2.2 with patch 3, when I executed application stop ise, I saw the below logs
Error response from daemon: no such id: irf-core-engine-runtimeirf-core-engine-runtime is not running
Error response from daemon: no such id: irf-rabbitmq-runtimeirf-rabbitmq-runtime is not running
Error response from daemon: no such id: irf-mongo-runtimeirf-mongo-runtime is not running
When I start ise again (application start ise), the application server is stuck in initialization, Is there anything I can check
Regards
Nikhil
Solved! Go to Solution.
10-25-2017 07:35 AM
Hi Nikhil
Have you tried 'application start ise safe' ? If this doesn't work I would suggest a reset-config and if this still doesn't work you may have to perform a reimage.
If you are going for a reset config you may need to generate CSR again unless you have backed up a copy certificates with private key.
Thanks
10-25-2017 07:35 AM
Hi Nikhil
Have you tried 'application start ise safe' ? If this doesn't work I would suggest a reset-config and if this still doesn't work you may have to perform a reimage.
If you are going for a reset config you may need to generate CSR again unless you have backed up a copy certificates with private key.
Thanks
10-25-2017 08:31 AM
Also it would be nice to investigate with the TAC to get a bug if needed
10-25-2017 09:30 AM
The messages on irf are expected when TC-NAC disabled. However, ISE should be able to start correctly.
10-27-2017 12:42 AM
This is what I observed in my setup
1>>I have two boxes running ISE 2.2 patch 3.
2>>I broke the HA for upgrade and didn't join HA back, the boxes are independent now
3>> I am mainly using the ISE boxes for Wireless CWA guest authentication.
4>> I have opened the admin console ( GUI for the ISE box) from Mozilla browser
5>> The ISE boxes are getting requests from the wireless controller for guest authentication
6>> I change the host name of the ISE, which restart the ISE application,
7>> When ISE receives the CWA request from the wireless controller during application restart, this crashes the ISE application
I observed this behavior with both my boxes and had to re-image
Regars
Nikhil
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide