Upgrade Secondary PAN and Secondary MnT Nodes to Cisco ISE, Release 2.7, 3.0 or 3.13.0, 3.1 or 3.2
Before you begin
Restore backup from your existing Cisco ISE to intermediate Cisco ISE Release. If you do not want to retain the older reporting data, skip steps 4 to 6.
Procedure
Step 1 |
De-register Secondary PAN node. |
Step 2 |
Re-image the deregistered Secondary PAN node to the intermediate Cisco ISE Release, as a standalone node. After the install, make this node the Primary Administration Node in the new deployment. |
Step 3 |
Restore Cisco ISE configuration from the backup data. |
Step 4 |
De-register Secondary MnT node. |
Step 5 |
Re-image the deregistered Secondary MnT node to the intermediate Cisco ISE Release, as a standalone node. |
Step 6 |
Assign Primary role to this Mnt node and restore the operational backup from the backup repository. This is an optional step and needs to performed only if you need to report of the older logs |
Step 7 |
Import ise-https-admin CA certificates from your original Cisco ISE backup repository. |