12-08-2017 03:04 PM
Seeing a warning icon on ISE dashboard after adding licenses. licesning team advised to reboot box.
The Admin node is in production. What effect will rebooting this node have on our environment?
If I’m unable to reboot the node (likely) what effect will de-registering then re-registering the device have?
Solved! Go to Solution.
12-09-2017 06:18 AM
You should be working through the tac on this for hands on guidance as this is critical and needs to be discussed in detail on what to recommend.
It might require some more debugging and troubleshooting.
Any of this should be done after hours. My recommendation would be to try failing over to the secondary pan to see what happens.
If you would like to see what happens when PAN is unavailable please look at this section of the admin guide
https://www.cisco.com/c/en/us/td/docs/security/ise/2-2/admin_guide/b_ise_admin_guide_22/b_ise_admin_guide_22_chapter_010.html#ID57
12-09-2017 06:18 AM
You should be working through the tac on this for hands on guidance as this is critical and needs to be discussed in detail on what to recommend.
It might require some more debugging and troubleshooting.
Any of this should be done after hours. My recommendation would be to try failing over to the secondary pan to see what happens.
If you would like to see what happens when PAN is unavailable please look at this section of the admin guide
https://www.cisco.com/c/en/us/td/docs/security/ise/2-2/admin_guide/b_ise_admin_guide_22/b_ise_admin_guide_22_chapter_010.html#ID57
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide