07-05-2012 07:01 PM - edited 03-10-2019 07:16 PM
Hi,
I need to deploy ISE on the network for corporate users. I want my users will be switched from untrusted network ( VLAN) to trusted network after proper authentication. I want to use authentication based on workstation MAC address and AD authentication. What should I configure on the policy on the ISE and what should I configure on the switchport. Appreciate your help on this.
Thanks.
07-05-2012 08:02 PM
This is open ended. There is a lot to ISE. If you are deploying for the first time, I would highly suggest the ISE course to familiarize yourself with the policies and processing of ISE. 5 days of hands-on and Q&A would provide a long term understanding of the product.
For more info you can check the course out below. I have the labs at version 1.1 and ready for 1.1.1 once the release happens:
http://www.globalknowledge.com/training/course.asp?pageid=9&courseid=16777&country=United+States
Hope it helps,
Jim
05-28-2013 03:37 AM
For AD integration and configuring authentication rule this link will be helpfull
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide