ISE Documents For Below requirement

[zeuscyril]

hi Guys,

i have one ISE requirement with the following Tasks.

1. The users will bring their own devices any device (laptop,iphone,ipad,mac,andorid) evrybody will use mostly wireless only.

2. the devices should be web authenticated , the authentication should be AD authentication . authentication needs to limited for only 2 sessions.

3.once they log-out from one session , they need to use in another device. is can be achieved with  web authentication or we need to profiling.

4.in AD authentication there are groups according to the groups need to give the access to the network.

5. in the Local LAN cable also the same requirement. ( they should not use any routers in the lan instead of laptop)

please explain scanrio which i can implement or any guides which i can use to achieve the about points. if any body can explain which best practice will give the best solution for the above requirement.

thanks

cyril

[nspasov]

Hello Cyril-

You can use the guest flow and guest portal in ISE to accomplish this. Take a look at the following document that will walk you through the configs and let us know if you have any questions/issues

http://www.cisco.com/c/en/us/support/docs/security/identity-services-engine/115732-central-web-auth-00.html

Thank you for rating helpful posts!

[Venkatesh Attuluri]

As Neno Spasov suggested Central web auth will suit your need. You can find example config doc for Central Web Auth (wired/wireless) and other BYOD config example here

http://www.cisco.com/c/en/us/support/security/identity-services-engine/products-configuration-examples-list.html