07-18-2018 05:43 AM
Do we have any configuration examples for doing Dynamic VLAN assignments on ISE (2.0) for a WLC implementation? I’ve spent some time digging through the usual guides, but have found nothing. Perhaps customer needs to upgrade? Thanks for any documentation you can point me to.
Solved! Go to Solution.
07-18-2018 06:44 AM
Dynamic VLAN assignment is a standard feature of ISE and WLC. You need to assign the VLAN via Authorization Profile and policy in ISE, then enable AAA Override on the WLAN at the WLC. That should be enough.
This guide may help...
https://eapea.ru/dynamic-vlan-assignment-with-radius-server-cisco-ise-1-3-and-wlc-configuration/
07-18-2018 06:44 AM
Dynamic VLAN assignment is a standard feature of ISE and WLC. You need to assign the VLAN via Authorization Profile and policy in ISE, then enable AAA Override on the WLAN at the WLC. That should be enough.
This guide may help...
https://eapea.ru/dynamic-vlan-assignment-with-radius-server-cisco-ise-1-3-and-wlc-configuration/
07-18-2018 03:20 PM
Thank you Craig.
-Krishnan
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: