ISE Guest Port Direction not working

[SiJian Bao]

Hi Guys,

Got a problem here with ISE guest authentication.

My configuration in the WLC is as bellows:

And the configuration in my ISE is as bellows:

After my device connects to the SSID, I cannot be redirected to the guest portal, no redirection URL showed up in my browser, while the URL is pushed to the WLC client as bellows:

DNS A record has been added before and I can open the FQDN.

Can anyone help me about this? Thanks!

Best Regards,

Savi

[Jatin Katyal]

Are you able to ping / nslookup to ISE.wuscnad.com from the test client?

Also, please provide a screen shot of the set of ACL's CWA-Guest from the WLC?

Here is a document you can go through to configure wireless CWA  

http://www.cisco.com/c/en/us/support/docs/security/identity-services-engine/115732-central-web-auth-00.html

Regards,

Jatin

[SiJian Bao]

Hi Jatin,

The problem was resolved just after reloading the WLC, so it seems that there might be something wrong with pushing the URL from the WLC to the client. Thanks a lot for your reply anyway.

Best Regards,

Savi

[Jatin Katyal]

Thanks for updating /closing the thread.

Appreciate it.

Jatin