11-27-2017 10:51 AM
Hi,
Do we have any documentation or particular details around ISE integration with IBM Netcool?
The information I was able to gather so far:
* for physical chassis monitoring (in case of physical appliance) - SNMP on CIMC (using MIB's for UCS)
* for OS / ISE application status (e.g. process started/stopped) monitoring - SNMP on ISE
* for events within the ISE application (e.g. Active Directory forrest not available) monitoring - Syslog and/or email on ISE
Does the above look right?
Thanks!
Solved! Go to Solution.
11-27-2017 03:35 PM
Hi George,
Here is another thread on ISE and IBM Netcool you might find useful
https://communities.cisco.com/thread/82330?start=0&tstart=0
Thanks
Krishnan
11-27-2017 03:35 PM
Hi George,
Here is another thread on ISE and IBM Netcool you might find useful
https://communities.cisco.com/thread/82330?start=0&tstart=0
Thanks
Krishnan
11-28-2017 02:09 AM
Thanks, Krishnan!
I already had a look at that thread and I am looking for more in-depth information on the integration on top of what's in the admin guide (if available).
Regards,
George
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide