11-27-2017 10:51 AM
Hi,
Do we have any documentation or particular details around ISE integration with IBM Netcool?
The information I was able to gather so far:
* for physical chassis monitoring (in case of physical appliance) - SNMP on CIMC (using MIB's for UCS)
* for OS / ISE application status (e.g. process started/stopped) monitoring - SNMP on ISE
* for events within the ISE application (e.g. Active Directory forrest not available) monitoring - Syslog and/or email on ISE
Does the above look right?
Thanks!
Solved! Go to Solution.
11-27-2017 03:35 PM
Hi George,
Here is another thread on ISE and IBM Netcool you might find useful
https://communities.cisco.com/thread/82330?start=0&tstart=0
Thanks
Krishnan
11-27-2017 03:35 PM
Hi George,
Here is another thread on ISE and IBM Netcool you might find useful
https://communities.cisco.com/thread/82330?start=0&tstart=0
Thanks
Krishnan
11-28-2017 02:09 AM
Thanks, Krishnan!
I already had a look at that thread and I am looking for more in-depth information on the integration on top of what's in the admin guide (if available).
Regards,
George
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: