ISE NFR expand disk to 200gb

[jan.nielsen]

Hi,

I have an ISE NFR server running 1.1.1.268 which i have upgraded to 1.2, which works fine, except for one minor thing, the disk required is 200gb, and the NFR is created with 60GB, and so i get alot of alarms in the gui. I know i could probably just disabled the alarm, but i would like to know if there is any way of resizing the disks in ISE ? I resized in my VM settings, but i have no apparent way of making ISE resize the actual filesystem partion.

[Venkatesh Attuluri]

VMware Virtual Machine Settings for Cisco ISE, Release 1.2

http://www.cisco.com/en/US/docs/security/ise/1.2/upgrade_guide/b_ise_upgrade_guide_chapter_01.html#reference_C446D967A4374DC3B613B8CB3F303007

[Karsten Iwen · Accepted solution]

I solved the problem the following way:

I installed a completely new ISE with the HW-requirements met and added that to my NFR-deployment. Then change roles (in my case add another ISE) and later remove the original one.

-- 
Don't stop after you've improved your network! Improve the world by lending money to the working poor:
http://www.kiva.org/invitedby/karsteni

[jan.nielsen]

Of course, i'll try that right away. Thanks. Also i contacted my local Cisco SE, and asked him to find out if Cisco are coming out with a new NFR build soon, i'll let you guys know.

[jan.nielsen]

Works like a charm. My SE told my Cisco are working on an ISE 1.2 NFR, which will be available shortly.