07-28-2024
06:51 PM
- last edited on
07-28-2024
08:03 PM
by
shaiksh
Dear Community,
As per checked on my lab, there is alarms pxGRID node average IO read performance directly from disk device is 275 MB/Sec. Which is less than the min requirement of 300 MB/Sec.
Note: ISE 3.1
Kindly share your commend where can check on / monitor it?
Is it the normal / abnormal and will impact to VM or not?
Thanks for your supporting and collaboration.
Best Regards,
07-28-2024 09:05 PM
As far as I can tell, ISE checks this every hour (much to the horror of one customer with whom I worked years ago - he says that his VMWare storage array was freaking out every hour because of these spikes.) - not sure why Cisco does this it seems a bit extreme in my opinion.
But you can check the latest speed tests with a show tech
show tech-support
- e.g. after a few pages of data you might see something like this - as you can see, it varies.
************************************************
Displaying Historical VM IO performance metrics
************************************************
**** VM I/O WRITE BANDWIDTH DATA:
104857600 bytes (105 MB, 100 MiB) copied, 0.12465 s, 841 MB/s
104857600 bytes (105 MB, 100 MiB) copied, 0.111422 s, 941 MB/s
104857600 bytes (105 MB, 100 MiB) copied, 0.107102 s, 979 MB/s
104857600 bytes (105 MB, 100 MiB) copied, 0.287822 s, 364 MB/s
104857600 bytes (105 MB, 100 MiB) copied, 0.120879 s, 867 MB/s
104857600 bytes (105 MB, 100 MiB) copied, 0.145492 s, 721 MB/s
104857600 bytes (105 MB, 100 MiB) copied, 0.142454 s, 736 MB/s
104857600 bytes (105 MB, 100 MiB) copied, 0.11227 s, 934 MB/s
104857600 bytes (105 MB, 100 MiB) copied, 0.110557 s, 948 MB/s
104857600 bytes (105 MB, 100 MiB) copied, 0.119484 s, 878 MB/s
104857600 bytes (105 MB, 100 MiB) copied, 0.0996356 s, 1.1 GB/s
**** VM I/O READ BANDWIDTH DATA:
1024000000 bytes (1.0 GB, 977 MiB) copied, 1.30706 s, 783 MB/s
1024000000 bytes (1.0 GB, 977 MiB) copied, 1.45591 s, 703 MB/s
1024000000 bytes (1.0 GB, 977 MiB) copied, 0.959308 s, 1.1 GB/s
1024000000 bytes (1.0 GB, 977 MiB) copied, 1.43775 s, 712 MB/s
1024000000 bytes (1.0 GB, 977 MiB) copied, 0.977619 s, 1.0 GB/s
1024000000 bytes (1.0 GB, 977 MiB) copied, 2.00086 s, 512 MB/s
1024000000 bytes (1.0 GB, 977 MiB) copied, 1.31597 s, 778 MB/s
1024000000 bytes (1.0 GB, 977 MiB) copied, 0.911317 s, 1.1 GB/s
1024000000 bytes (1.0 GB, 977 MiB) copied, 0.868875 s, 1.2 GB/s
1024000000 bytes (1.0 GB, 977 MiB) copied, 0.760357 s, 1.3 GB/s
1024000000 bytes (1.0 GB, 977 MiB) copied, 1.71004 s, 599 MB/s
07-28-2024 09:38 PM
@Arne Bier Based on CiscoLive 2020 (Working on Solid ISE), ISE continues to test I/O read/write performance on 3-hour intervals:
07-28-2024 11:23 PM
Dear @rezaalikhani ,
Let us check. thanks.
07-28-2024 11:22 PM
Dear @Arne Bier ,
Let me review. thanks.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide