07-01-2021 07:00 AM
Hi Everyone,
I have a query based on profiling.
When I check live logs, I see guests being listed as unknown under endpoint profile.
Is there a way to create endpoint profile for guests ?
Thank you in advance
Solved! Go to Solution.
07-01-2021 10:50 PM
If the network device is configured to provide profiling information to ISE, it should be able provide some level of profiling of the endpoint. The level of detail in the profiling depends entirely on how much information ISE can learn from the network about the endpoint.
I would suggest reading through the ISE Profiling Design Guide to get a better understanding of how profiling works.
07-01-2021 10:50 PM
If the network device is configured to provide profiling information to ISE, it should be able provide some level of profiling of the endpoint. The level of detail in the profiling depends entirely on how much information ISE can learn from the network about the endpoint.
I would suggest reading through the ISE Profiling Design Guide to get a better understanding of how profiling works.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide