12-10-2019 01:38 PM
hello,
I was wondering why my endpoints profile shows as the machine vendor name instead of the OS Like ( Windows 7 or 10 )
Solved! Go to Solution.
12-10-2019 03:14 PM
Hi
Your devices have been successfully profiled as dell devices ( because their MAC OUI contains Dell).
To be profiled as Windows 10/7 requires ISE to collect more attributes (from other probes) for these devices.
ISE profiling policies are listed under Policy > Profiling > Profiling Policies and the conditions for these policies under Policy > Policy Elements > Conditions > Profiling.
e.g. to profile the devices as Microsoft-workstation, you could configure the ISE DHCP probe to collect the required dhcp attribute - to get to a specific OS may require an nmap scan
hth
Andy
12-10-2019 03:14 PM
Hi
Your devices have been successfully profiled as dell devices ( because their MAC OUI contains Dell).
To be profiled as Windows 10/7 requires ISE to collect more attributes (from other probes) for these devices.
ISE profiling policies are listed under Policy > Profiling > Profiling Policies and the conditions for these policies under Policy > Policy Elements > Conditions > Profiling.
e.g. to profile the devices as Microsoft-workstation, you could configure the ISE DHCP probe to collect the required dhcp attribute - to get to a specific OS may require an nmap scan
hth
Andy
12-11-2019 06:34 AM
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide