10-10-2018 08:31 AM
HI all,
Is it possible someone to help me out with the following questions in regards of ISE please ?
Is it possible to achieve the following with ISE ?
Publish single SSID for GovRoam
If internal user authenticated then dynamically assign user to a Corporate VLAN (Local
If External user authenticated then route traffic via Guest Anchor controller
Thank you for your input in advance.
Regards
Ross
Solved! Go to Solution.
10-10-2018 05:56 PM
This is not possible due to WLC limitation. A given WLAN is either auto-anchored or not and it cannot be both non-anchored and auto-anchored based on user/endpoint currently. We can assign different VLANs based on user/endpoint type and guest VLAN can be mapped to a vrf that gets handled differently.
10-10-2018 05:56 PM
This is not possible due to WLC limitation. A given WLAN is either auto-anchored or not and it cannot be both non-anchored and auto-anchored based on user/endpoint currently. We can assign different VLANs based on user/endpoint type and guest VLAN can be mapped to a vrf that gets handled differently.
10-11-2018 01:49 AM
Many thanks for your great input.
Regards
Ross
10-11-2018 02:02 AM
10-11-2018 06:19 AM
When you have a WLAN mapped from foreign to anchor (guest), all traffic will get anchored regardless of who connects to the WLAN. One can't choose some users to be anchored on foreign controller and others through the anchor controller on the same WLAN.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: