cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
3441
Views
1
Helpful
1
Replies

ISE Stunnel frequent restart

pnavratil
Level 1
Level 1

I found suspicious messages in ISE Report -> Audit -> Operations Audit. There is Stunnel Service started aprox. every 30 seconds on one PSN node (the rest 3 PSN nodes in deployment does not do this). The whole message:
----

ISE process was restarted by watchdog service

Event: Process: 'ISE Stunnel Service' started by ISE watchdog process

----

I did not detect any other problem on this node - it authenticates endpoints regulary, it reports all the data...

Is somebody met this behaviour? Is there any danger behind this?

Thank you for any help/advice.

1 Accepted Solution

Accepted Solutions

Hi,

STunnel is an open source program installed in ISE but not used for ISE
functions. So these restarts won't be cuz functional problems however you
can open a tac case to see if you are hitting a bug which be resolve these
cosmetic messages.

Here is the list of open source programs used in ISE.

https://www.cisco.com/c/dam/en/us/td/docs/security/ise/3-0/open_source/ISE30Release-ISE_30-1598357021.pdf

***** please remember to rate useful posts

View solution in original post

1 Reply 1

Hi,

STunnel is an open source program installed in ISE but not used for ISE
functions. So these restarts won't be cuz functional problems however you
can open a tac case to see if you are hitting a bug which be resolve these
cosmetic messages.

Here is the list of open source programs used in ISE.

https://www.cisco.com/c/dam/en/us/td/docs/security/ise/3-0/open_source/ISE30Release-ISE_30-1598357021.pdf

***** please remember to rate useful posts