04-21-2012 10:58 AM - edited 03-10-2019 07:01 PM
Hi All,
I want to manage all cisco devices with read and write privilege with ISE 1.0.
Is this functionality is available in this version?
I configured the 2960 switch. On switch redius test is successful. When I telnet to the switch, it ask for username and password. But message is authorization fail. But on ISE shows authentication is successful.
Is it configuration issue or this feature is not available in this version?
Regards,
Hanumant
Solved! Go to Solution.
04-21-2012 12:49 PM
Hanumant,
You will have to create an authorization profile to send back the privilege level for the user:
Here is the attribute (cisco-av-pair) you will have to send back:
shell:priv-lvl=xx
04-21-2012 12:49 PM
Hanumant,
You will have to create an authorization profile to send back the privilege level for the user:
Here is the attribute (cisco-av-pair) you will have to send back:
shell:priv-lvl=xx
04-26-2012 09:12 AM
Hi Tarik,
Thank you very much.
I today checked and now get the management access for cisco devices.
Hanumant
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide