06-20-2019 12:55 AM - edited 02-21-2020 11:07 AM
Hi,
My current environment is configured for 802.1x using Cisco ISE and require machine cert and user cert authentication before a machine is authorised and assigned a vlan. Currently i notice my LAN with ISE works well and is very stable but my WLAN is rather unstable with ISE such that intermittently i don't see any machine cert authentication on my ISE logs when i boot up my machine. There are times where machine authentication with ISE would be able to work on the 1st boot up. Can anyone guide me how i can do a end to end tracking for my machine authentication that is done over wireless starting from the WLC? My WLC is AIR-CT3504. I have already ensured that the required 802.1x settings is already applied on my machine for both LAN and WLAN adaptor. Please advise. TIA!
Solved! Go to Solution.
06-20-2019 02:02 AM
06-20-2019 05:31 AM
06-20-2019 02:02 AM
06-20-2019 05:31 AM
06-29-2019 10:23 PM
I concur with Mohammed al Baqari and Mike.Cifelli.
You may also take a look at Data collection for troubleshooting 802.1X authentication and Collect Debugs From Wireless LAN Controller (WLC)
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide