Issue with RSA authentication after RSA...

Announcements

February 27: ISE Awarded Best NAC Solution in the SC 2020 Awards
Register for the monthly ISE Webinars to learn about ISE configuration and deployment.

Choose one of the topics below to view our ISE Resources to help you on your journey with ISE

This community is for technical, feature, configuration and deployment questions.
For production deployment issues, please contact the TAC! We will not comment or assist with your TAC case in these forums.
Please see How to Ask the Community for Help for other best practices.

353

Views

Helpful

Replies

I'm having issues authenticating cisco devices through rsa after an IP change to my RSA replica server. I made the appropriate config changes within the cisco devices after changing the IP address.

This image shows the message I'm receiving in RSA Authentication Monitor when my cisco switch sends an auth request to the rsa server.

The cisco switch IP is 10.44.64.11, for some reason its using the cisco switch's IP as the authentication agent IP. 10.69.44.32 is my rsa server IP that it should be using as the authentication agent. Normally, the Server Node IP and Client IPv4 addresses show up as the 10.69.44.32 address.

Anyone encountered this issue before?

Latest Contents

Alcatel 8068S VPN configuration with FTD 6.4

Created by fthiel92 on 03-28-2020 03:48 PM

Purpose of this article is to share our experience during that Covid-19 period where we were able to successfully setup a VPN configuration for remote worker using Alcatel 8068S phones with FTD 2110 running 6.4.0.8.I would like to thank all of my colleagu... view more

Downloadable Redirect ACL with ISE

Created by howon on 03-27-2020 02:33 PM

If you have ever configured central web authentication with ISE you understand that it requires one to configure ACL that dictates what traffic is to be redirected vs. let through without redirection. You also understand that this ACL needs to be config... view more

What's New in CDO?

Created by Andrew Mallio on 03-27-2020 02:29 PM

Hello! Cisco Defense Orchestrator (CDO) is a cloud-based multi-device manager that can manage security products like the Adaptive Security Appliance (ASA), the Firepower Threat Defense next-generation firewall, and Meraki devices, to name a few.&nb... view more

Episode 57 - Maximizing AnyConnect Performance During the CO...

Created by Kevin Klous on 03-27-2020 07:34 AM

Show Name: Maximizing AnyConnect Performance During the COVID-19 Pandemic Contributors: Kevin Klous, Security Technical Leader, Cisco Shannon Wellington, Technical Consulting Engineer, Cisco Jay Young, Security Technical Leader, Cisco Wen Zhang, Securit... view more

Backup Cloud Email Security Appliance

Created by lilianamartinez on 03-23-2020 08:37 PM

Hello, Im't triying to get a backup from my ESA and SMA but I get "You are not in the correct access group to use the saveconfig command." log when I try via CLI with "showconfig, saveconfig or mailconfig" I tried in cluster mode, group mode an... view more

CreatePlease to create content

Issue with RSA authentication after RSA server IP change