cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
477
Views
22
Helpful
2
Replies

Latest version ise 3.1 question

Leftz
Level 4
Level 4

Hi After logon to ise 3.1, it show the below. Where is its dashboard? thanks

 

zshowip_0-1676912772857.png

 

2 Accepted Solutions

Accepted Solutions

@Leftz looks like you've not logged into the Primary PAN, only the Primary PAN will give you full configuration options.

The other option could mean you have RBAC configured and you have very limited access.

View solution in original post

Marvin Rhoads
Hall of Fame
Hall of Fame

Like @Rob Ingram suggested, you have definitely logged into an ISE node other than the Primary Policy Administration Node (PAN).

ISE deployments can have multiple servers but only one (the Primary PAN) has the full configuration menu as it controls all of the other nodes' roles and configurations.

View solution in original post

2 Replies 2

@Leftz looks like you've not logged into the Primary PAN, only the Primary PAN will give you full configuration options.

The other option could mean you have RBAC configured and you have very limited access.

Marvin Rhoads
Hall of Fame
Hall of Fame

Like @Rob Ingram suggested, you have definitely logged into an ISE node other than the Primary Policy Administration Node (PAN).

ISE deployments can have multiple servers but only one (the Primary PAN) has the full configuration menu as it controls all of the other nodes' roles and configurations.