cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
Announcements
Choose one of the topics below to view our ISE Resources to help you on your journey with ISE

This community is for technical, feature, configuration and deployment questions.
For production deployment issues, please contact the TAC! We will not comment or assist with your TAC case in these forums.
Please see How to Ask the Community for Help for other best practices.

706
Views
4
Helpful
5
Replies
Highlighted
Beginner

Limit the number of session per user in the Wired dot1x environment with ISE 1.2

Hello,

I need to check if there is any configuration/workaround to limit the number of sessions/access per user in the Wired dot1x configuration.

I need to check if this feature is available or not to solve the following scenario:

I have 2 SW ports configured to use dot1x authentication with ISE 1.2 server.

If user A connects to the 1st port and authenticated then he will placed on a VLAN based on the authorization profile.

The case, that I need to deny the same user to connect on a different machine with the same credentials.

The ISE itself does not have this feature currently,  the only feature available is to limit the number of sessions for the guest user.

Is there any workaround on the Cisco switches to solve this? Cisco WLC has this feature and for the VPN we can limit the number of sessions also from the ASA itself.

Thanks.

Everyone's tags (8)
5 REPLIES 5
Highlighted
Enthusiast

Limit the number of session per user in the Wired dot1x environm

limit of the number of simultaneous session per user is not in ISE 1.2

Highlighted
Beginner

Is this feature available for

Is this feature available for 1.3 for limiting the wired sessions?.

Highlighted
Beginner

No, you don't have this

No, you don't have this feature on 1.3

Highlighted
Beginner

Thank you Ahmad for the

Thank you Ahmad for the update..

Highlighted
Cisco Employee

limit number of session per

limit number of session per user using wired dot1x is not available in 1.3