Logging in to a Nexus 5000 and UCS Manager via ACS

[kenny.kerns]

Hi all,

I have an environment with Nexus 5000's and 6000's that are running UCS
manager.  My problem is that it seems that the two switches both use the
Cisco-AV-Pair but have different roles associated with admin level privs.

For example, I have successfully logged in to the 5000 using the AV-Pair
shell:roles="network-admin" and I have also successfully logged in to
the UCS manager the AV-Pair shell:roles=admin, but when I have both AV-Pairs in
my shell command set it seems that the UCS manager is selecting the AV-Pair
that is for the 5000, which drops me in to a non-admin session.

I need to be able to have both AV-Pairs in my shell command set and make sure the
proper Pair is selected for the proper switch.

Thanks,

Kenny

[kenny.kerns]

Answered my own question...Its really simple actually, both values have to be in the same attribute, i.e.

shell:roles="admin network-admin"