cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

This community is for technical, feature, configuration and deployment questions.
For production deployment issues, please contact the TAC! We will not comment or assist with your TAC case in these forums.
Please see How to Ask the Community for Help for other best practices.

498
Views
0
Helpful
0
Replies
hbaytie01
Beginner

Login to Cisco Core Switch through MFA Via ISE

Hi,

 

I have a 68XX core switch and i have a requirement to login using MFA. I came out with a conclusion that it must be done through ISE server. We already have a radius server which is integrated with an MFA server and we're already using it for F5 and Palo Alto login. What we did is that we only point the authentication for the user to the radius server that has MFA service and login is successful for Palo Alto and F5. My question is that how can I configure it on ISE for the core switch and my knowledge in ISE is very little. For the switch configuration, it is simple and we only add the ISE as an AAA server(Attached Config). I read something related to proxy MFA or something like that. Can someone help me with detailed steps.

0 REPLIES 0
Content for Community-Ad