Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello Guys,I need to specify the drawbacks of using a WLC and I need to make sure the below is right:1- Once you use a WLC then the traffic is encrypted between the AP and WLC, Therefore when the capwap tunnel passes through the DC firewall it will n...
Hello guys,I'm still not finding the right answer to my question: Why can't WiFi work as full-duplex while 3G and 4G can?APs have multiple antennas so the question is: why can't we add two antennas to an AP and each antenna will work on a different c...
Hello guys,I have a couple of questions that are confusing me: 1- Can a 4x4 access point serve four 1x1 clients at the same time or there are other constraints?2- When they say the AP is 4x4:4 and it has four streams, what makes an AP physically hav...
Hello Community,In this fast-evolving cybersecurity world nowadays. Can anybody really define in the best attractive way the role of the security devices and their differences that we need to propose to customers? It's like a mess nowadays, you don't...
Hi, I was wondering if Cisco has a Questionaire table or something alike that we can send to our customers once they have a switching requirement. A lot of them just send that they need a switch that has 24 or 48 port but later on, we discover that t...
Hello Giuseppe, You're totally right about meeting the customer which is always the best way in many matters. However, sometimes you just get looped in an email requesting maybe a couple of switches which just needs something fast and somehow precise...
Also you can't configure IPSec vpn between two MX if the WAN ports have private IPs. The MX will not negotiate IPSec unless the port has internet connection, the port status will show failure until it gets internet connection. Hence, if you have two...
