hi all,
been testing wired dot1x (EAP-TLS) on macos devices. Using vmware workspace one to push the profile to the device. At the first time connecting, was prompted to select the certificate, chose the cert, checked the remember information box and auto-connect box. Successfully connected. If you unplug the cable and plug it back in, still connects fine. However, after a reboot, the mac does not auto-connect. You have to manually click connect (no other prompts are presented, it connects right away)
Has anyone experienced similar or have any advice on properly setting this up?
Note: ethernet connection is provided by docking station or usb-c adapter (no built-in ethernet adapter)
