10-24-2023 04:20 AM
Dears,
We have ISE 3.2 VM and we want to purchase ISE hardware Appliance. so we want to know what is the procedure that we can take to migrate the configuration from the VM to the hardware. how we can do it?
Thanks in advance
Solved! Go to Solution.
10-24-2023 04:52 AM
@nematosama use the backup and restore method, restoring the current configuration to new hardware. Instructions:- https://www.cisco.com/c/en/us/td/docs/security/ise/3-0/upgrade_guide/HTML/b_upgrade_method_3_0.html#id_125062
If you are migrating from 2.X to 3.2 then you will need to migrate the ISE licenses - https://www.cisco.com/c/en/us/products/collateral/security/identity-services-engine/ise-licensing-guide-og.html#8CiscoISElicensemigration
10-24-2023 04:52 AM
@nematosama use the backup and restore method, restoring the current configuration to new hardware. Instructions:- https://www.cisco.com/c/en/us/td/docs/security/ise/3-0/upgrade_guide/HTML/b_upgrade_method_3_0.html#id_125062
If you are migrating from 2.X to 3.2 then you will need to migrate the ISE licenses - https://www.cisco.com/c/en/us/products/collateral/security/identity-services-engine/ise-licensing-guide-og.html#8CiscoISElicensemigration
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide