Migrate configuration from ISE VM to ISE Hardware Appliance.

[nematosama]

Dears,

We have ISE 3.2 VM and we want to purchase ISE hardware Appliance. so we want to know what is the procedure that we can take to migrate the configuration from the VM to the hardware. how we can do it?

Thanks in advance

[Rob Ingram · Accepted solution]

@nematosama use the backup and restore method, restoring the current configuration to new hardware. Instructions:- https://www.cisco.com/c/en/us/td/docs/security/ise/3-0/upgrade_guide/HTML/b_upgrade_method_3_0.html#id_125062

https://www.cisco.com/c/en/us/td/docs/security/ise/3-2/upgrade_guide/Upgrade_Journey/Cisco_ISE_3-2_Upgrade_Journey.html

If you are migrating from 2.X to 3.2 then you will need to migrate the ISE licenses - https://www.cisco.com/c/en/us/products/collateral/security/identity-services-engine/ise-licensing-guide-og.html#8CiscoISElicensemigration