07-06-2017 12:36 PM
Hi to all, I need to migrate a cisco ACS 4.2 Server to CISCO ISE 2.2.
I will do a fresh Cisco Ise 2.2 Installation instead doing the migration procedure.
I have some questions:
1 - Actually the ACS only authenticate wireless users througth WLC - So how can I replicate that in Cisco ISE? (I need te procedure and policies if any)
Later I will ask more doubts.
Thanks in advance.
Kind Regards.
Solved! Go to Solution.
07-06-2017 01:23 PM
I would turn up Test SSID for secure wireless that points to ISE and validate that you can replicate the rules they have in ACS. Once you have validated ISE is authenticating the Test SSID correctly point the production SSID to ISE. If there are issues you can always point the production SSID back to ACS.
07-06-2017 01:23 PM
I would turn up Test SSID for secure wireless that points to ISE and validate that you can replicate the rules they have in ACS. Once you have validated ISE is authenticating the Test SSID correctly point the production SSID to ISE. If there are issues you can always point the production SSID back to ACS.
07-10-2017 09:51 AM
ACS 4.2 uses group based policies. You might have to create policies in ISE for authorization for e.g.: if you are using Network device groups, AD groups etc.
Other than that please try out as Paul mentioned above.
For ISE configuration with WLC, please use ISE Design & Integration Guides for reference.
Thanks
Krishnan
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide