Missing RADIUS on Cisco 3750

[kallekula22000]

When I upgraded my cisco 3750 ME from c3750me-i5k91-mz.122-46.SE to c3750me-i5k91-mz.122-58.SE2.bin all commands for radius disappeared? However, there are a lot of commands to ldap which was missing in the previous version. Seems as if the radius has disappeared and been replaced by ldap? Anyone have an idea of ​​what it could be ??

[kallekula22000]

This is now a confirmed bug.

CSCtr33075 Bug Details
Radius-server commands missing on C3750-ME
Symptom:
When upgrading from 12.2(55)SE to 12.2(58)SE, any config beginning with 'radius-server' in global configuration will no longer be accepted. With AAA New model enabled, attempting to type in 'radius' and parse out the command will yield no results.

Conditions:
Seen in ME-C3750-24TE-M running c3750me-i5k91-mz.122-58.SE1 and .SE

Workaround
None at this time

[jjones005]

Would you happen to have any information on setting up the new LDAP group server? I recently was changing to radius and ran into this similar problem.  I tried looking for some information on the group LDAP server and so far other than ASA configs i cannot find any.

[Naveen Kumar]

In the below link you may find the Catalyst 3750 Switch Radius configuration: Please try: 

http://www.cisco.com/en/US/docs/switches/lan/catalyst3750/software/release/12.2_52_se/configuration/guide/swwebauth.html

[jjones005]

tried following that link but it seems that the ip radius commands are missing from my switch build.  about the only aaa authentication option i have in this build is tacacs+ and ldap.

[Ravi Singh]

This is a bug and till now there is no work around of this problem. as soon as any update comes we will post it here for you.