Multiple Data VLAN + ISE

[minkumar]

Hi All,

  I have a client he has two data vlan's 100,101. He doesnt want to segregate the user type, But he wants that if user connects to any of the WLC in the enviorment, He should be connected to any  data VLAN's.

On ISE, I can create rule, based out of location and push vlan 100

Is there any way I can push multiple vlan's, so that whenever user connect he can be part of any vlan,

Let me know If I confused you..

[Tarik Admani]

Try using interface groups and send an access accept.

http://www.cisco.com/c/en/us/td/docs/wireless/controller/7-4/configuration/guides/consolidated/b_cg74_CONSOLIDATED/b_cg74_CONSOLIDATED_chapter_0100110.html

[minkumar]

Hey Tarik,

   Access-Accept will have only one VLAN information. If I need to send multiple vlan's, How is that gonna work...

Minakshi

[Tarik Admani]

You don't send vlan info. Just use the interface group feature in the link I provided.