09-20-2012 02:01 PM - edited 03-10-2019 07:34 PM
“Machine and User Connection”
I am using Anyconnect Profile Editor, and got problem with making pattern for machine Identity. By default it is set to host/[username], the problem is with PEAP machine authentication on ACS I see host/username, Is there any pattern that will ensure that on ACS I receive host/[pc.name].[domain], in following format ? So if PC name is WIFI-PC and domain name is demo.local, it should be in following format host/WIFI-PC.demo.local.
Solved! Go to Solution.
09-20-2012 03:09 PM
Hi,
You have nothing to worry about, when ACS sees the format of host/machinename.domain, it automatically knows that this is a machine account and handles the authenticaiton correctly. Even the windows native supplicants sends the machine authentication in this format
If you check the netlogon logs you should see WIFI-PC$ for machine auth.
Thanks,
Tarik Admani
*Please rate helpful posts*
09-20-2012 03:09 PM
Hi,
You have nothing to worry about, when ACS sees the format of host/machinename.domain, it automatically knows that this is a machine account and handles the authenticaiton correctly. Even the windows native supplicants sends the machine authentication in this format
If you check the netlogon logs you should see WIFI-PC$ for machine auth.
Thanks,
Tarik Admani
*Please rate helpful posts*
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide