Need help - ACS 4.2

[Anukalp S]

Hi All,

I want give access or authentication to a specifc user on only two devices in ACS4.2. i am facing challenge while doing this using NAR. Can anyone pls help me out and show the exact process to do this, that would be apprecialble.

[Jatin Katyal · Accepted solution]

You can use ip based NAR for the specific user.

Go to user setup > edit user > Advanced settings > Network access restriction.

Check: Define IP-based access restrictions.

Permitted calling/point of access location .

Select the AAA clients you want to permit access.

For port and address use (*) without quotes.

Click enter.

Jatin Katyal


- Do rate helpful posts -

Advanced Settings

Network Access Restrictions (NAR)
Per User Defined Network Access  Restrictions

[Anukalp S · Accepted solution]

Thanks a lot Jatin, its working.

[Jatin Katyal]

Glad to know