Netflow Profiling

[smano]

Hello Everyone

I am testing netflow profiling for the first time. Using ISE 2.3, switch 3750 and a test endpoint generares netflow traffic. Have enabled netflow probe in ISE, flow record, export and monitor configs are in switch, Profiling Endpoint attribute filter is disabled. Checked that the Switch is exporting some netflow traffic to ise, but ISE context visibilty doesnt show any netflow attribute to create a profiling policy. 

Obviously, we can use different probe to create a profile. But netflow is in the use case and need to show its working. Can anyone explain how to make netflow profiling work? 

Thanks, in advance

[Rob Ingram · Accepted solution]

Hi,

This doc provides information on how to configure all the probes and might provide some useful guidance.

HTH

[poornakumar]

Hi Rob,

Not able to view this document,access is restricted for this document

[Rob Ingram]

@poornakumar that looks like a very old document, this is the latest up to date ISE profiling guide. https://community.cisco.com/t5/security-knowledge-base/ise-profiling-design-guide/ta-p/3739456