cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

This community is for technical, feature, configuration and deployment questions.
For production deployment issues, please contact the TAC! We will not comment or assist with your TAC case in these forums.
Please see How to Ask the Community for Help for other best practices.

1127
Views
5
Helpful
1
Replies
smano
Cisco Employee

Netflow Profiling

Hello Everyone

I am testing netflow profiling for the first time. Using ISE 2.3, switch 3750 and a test endpoint generares netflow traffic. Have enabled netflow probe in ISE, flow record, export and monitor configs are in switch, Profiling Endpoint attribute filter is disabled. Checked that the Switch is exporting some netflow traffic to ise, but ISE context visibilty doesnt show any netflow attribute to create a profiling policy. 

 

Obviously, we can use different probe to create a profile. But netflow is in the use case and need to show its working. Can anyone explain how to make netflow profiling work? 

 

Thanks, in advance

1 ACCEPTED SOLUTION

Accepted Solutions
Rob Ingram
VIP Mentor

Hi,

This doc provides information on how to configure all the probes and might provide some useful guidance.

 

HTH

View solution in original post

1 REPLY 1
Rob Ingram
VIP Mentor

Hi,

This doc provides information on how to configure all the probes and might provide some useful guidance.

 

HTH

View solution in original post

Content for Community-Ad