04-20-2011 08:06 AM - edited 03-10-2019 06:00 PM
Does anyone know if the Cisco ISE does TACACS?
Solved! Go to Solution.
04-20-2011 08:58 AM
Hi,
Nope. It is pure radius device.
Hope this helps.
Regards,
Anisha
P.S.: please mark this thread as answered if you feel your query is resolved. Do rate helpful posts.
04-20-2011 08:58 AM
Hi,
Nope. It is pure radius device.
Hope this helps.
Regards,
Anisha
P.S.: please mark this thread as answered if you feel your query is resolved. Do rate helpful posts.
04-20-2011 09:03 AM
Thanks for the answer.
Anyone know if there are plans to add TACACS?
04-20-2011 09:06 AM
Hi,
As far as i know. the answer should be "no". But yet, you can ask your accounts manager to enquire about the same.
Regards,
Anisha
- Do rate helpful posts
04-20-2011 09:35 AM
The ISE integrates with the Cisco Prime NCS correct? Is this software to replace WCS and ACS eventually? We just purchased ACS appliances a few months ago and the ISE debuts. Can the NCS work with our ACS 5.x and have the real time troubleshooting capabilities that the ISE has?
04-22-2011 05:52 AM
Hi,
You are right the ISE integrates with Cisco Prime NCS.
Not sure if this product is to eventually do away with WCS and ACS.
The data sheet of the NCS states the following: "Cisco Prime NCS is the ideal platform for converged wired and wireless user and access network management. It is built on the foundation of Cisco WCS, and also provides comprehensive lifecycle management of 802.11n and 802.11a/b/g enterprise-class indoor and outdoor wireless networks. "
so i don't think it is will do away with ACS.
Again as per the data sheet, your NCS can integrate with the ACS.
I am not a design person to be very frank with you. I am a break and fix person. you can try your luck with the products. Best i can do is give you a copy of the Data sheet which you might already have. Also you can try talking to your accounts team so that they can arrange the correct link from Cisco to help you clear your doubts regarding this product.
Here is the link to the data sheet:
Hope this helps.
Regards,
Anisha
P.S.: please mark this thread as answered if you feel your query is resolved. Do rate helpful posts.
08-06-2012 05:28 PM
I have been told by my Account SE and Channel SE that Cisco will add TACACS to version 2 which should be released in 2013.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide