new network adapters

[Peter Hagenaars]

Hi Guys,

We have the following problem. Our customer has the following equipment

Dell Latiude E7440 and Targus Docking stations (ACP70EU).

On every workplace is a dockingstation, now the Dell machine connects to the dockingstation and a new network adapter is created (Ethernet 3)

When we configure the 802.1x setting the client can connect to the network.

When we move the Dell machine to another workspace with another dockking station. the windows machine creates a new network adapter (ethernet 4) with the default windows settings (Window Protect Eap)

etc.

Do you know if there is a registry setting we can adjust so that every new network adapter gets the correct Windows Certificate settings?

regards,

Peter

[Charlie Moreton]

Peter,

You can accomplish this through Group Policies.  There is a VERY helpful guide to enable Certificate Templates and dot1x configuration on the client in the Partner GOLD Labs.

Start by going here:

http://tools.cisco.com/pecx/login?URL=searchCurricula?LOID=477399

Choose Path 3:

Then Choose the AD-LDAP lab:

You will have to have you CCO ID to get here.  If you cannot log in, then you should ask your AM for access.

Please Rate Helpful posts and mark this question as answered if, in fact, this does answer your question.  Otherwise, feel free to post follow-up questions.

Charles Moreton