02-09-2024 05:47 AM
Hello everybody;
As you know, we have several methods available to create conditions for our authorization policies, some of which are more preferable than others. For example, using "Normalized Radius: SSID" is more preferable than "Called-Station-ID: CONTAINS SSID". Right?
In terms of Normalized Radius: RadiusFlowType Equals Wired802_1x and Wired_802.1X smart condition, which one is more preferable?
Thanks
Solved! Go to Solution.
02-11-2024 12:37 PM
See this description on a similar question answered by @Arne Bier - https://community.cisco.com/t5/network-access-control/ise-normalized-radius-vs-radius-attributes/td-p/4057480
If you have a multi-vendor environment, you might get benefit from using the Normalised RADIUS conditions.
02-11-2024 12:37 PM
See this description on a similar question answered by @Arne Bier - https://community.cisco.com/t5/network-access-control/ise-normalized-radius-vs-radius-attributes/td-p/4057480
If you have a multi-vendor environment, you might get benefit from using the Normalised RADIUS conditions.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide