not able to add the library condition

[sho14.kam]

i'm configuring device authentication for the cisco switches. in the Device admin policy set i have created a policy set and after going to view and configuring authorization policy, i'm not able to find the library condition, only the default conditions are appearing. How i can add a new condition in it?

[ognyan.totev]

Maybe start with version of ISE than show us some screen shot .

[hslai · Accepted solution]

For ISE 2.2+, we may add library conditions in two ways.

Either in Policy Elements > Conditions > Library Conditions

Video Link : 17178

Or, inside the Condition Studio.

Video Link : 17179

[sho14.kam]

hi hslai,

thanks for your reply. it worked very well thank you.

now i'm facing another issue with the time synchronisation. can you let me know how we can set the time on ISE through cli.

[hslai]

ISE admin CLI syntax is similar to Cisco IOS so use the exec command clock. Please also ensure ntp server set to a reliable source.

[sho14.kam]

actually there is no ntp server in the network. so want to set the time manually. i tried to use the ios syntax but its not excepting the set command.

[hslai]

The command clock is in EXEC mode only.

myISE/admin# clock set Jul 16 15:05:00 ?

  <0-9999>  4 digit year, as in 2007

myISE/admin# clock set Jul 16 15:05:00 2018

[sho14.kam]

hi hslai,

thanks for the input. it worked

[blitaker]

The links to the videos do not work.