hello experts, i have the following ISE standalone eval version installed on a VM
ISE-ATIF/admin# show ver
Cisco Application Deployment Engine OS Release: 3.0
ADE-OS Build Version: 3.0.8.091
ADE-OS System Architecture: x86_64
Copyright (c) 2005-2020 by Cisco Systems, Inc.
All rights reserved.
Hostname: ISE-ATIF
Version information of installed applications
---------------------------------------------
Cisco Identity Services Engine
---------------------------------------------
Version : 3.0.0.458
Build Date : Sat Aug 29 20:51:28 2020
Install Date : Mon Mar 28 15:54:19 2022
i am trying to upgrade to 3.1.0.518 and i had run URT tool and it ran fine without any issues, i am trying to run "application upgrade prepare" using the below mentioned command
ISE-ATIF/admin# application upgrade prepare ise-upgradebundle-2.6.x-3.0.x-to-3.1.0.518.SPA.x86_64.tar.gz upgrade
Be sure that all your software is working stable, check your system on UI page (Administration > System > Health Checks)
Type yes once confirmed that health of the system is good to proceed: (yes/no) [yes] ? yes
G▒tting bundle to local machine...
% File transfer error
Application upgrade preparation Failed
please also see the DIR output as below
ISE-ATIF/admin# dir
Directory of disk:/
4096 Mar 28 2022 16:01:02 corefileanalysis/
4096 Aug 31 2020 15:00:28 corefiles/
0 Mar 29 2022 16:34:46 err.out
4096 Mar 30 2022 12:27:53 gc/
22294528 Mar 30 2022 14:31:31 ise-upgradebundle-2.6.x-3.0.x-to-3.1.0.518.SPA.x86_64.tar.gz
0 Mar 29 2022 10:30:01 ise-urtbundle-3.1.0.518-1.0.0.SPA.x86_64.tar
Usage for disk: filesystem
35356602368 bytes total used
235470938112 bytes free
285345910784 bytes available
what am i doing wrong ????
i can see the following logs in ISE
2022-03-30T09:08:27.127923+00:00 ISE-ATIF root: TLSv1.0/TLS1.1 value from db 1 and 1 respectively
2022-03-30T09:08:28.313809+00:00 ISE-ATIF root: info:[application:operation:sp-hub-control.sh] Container run status
2022-03-30T09:08:29.118327+00:00 ISE-ATIF root: info:[application:operation:ropc-control.sh] Container run status
2022-03-30T09:08:40.496787+00:00 ISE-ATIF ADE-SERVICE[5832]: [18040]:[info] user: install_cli.c[72] [admin]: Illegal characters or double dots not found in name ise-upgradebundle-2.6.x-3.0.x-to-3.1.0.518.SPA.x86_64.tar
2022-03-30T09:08:40.498061+00:00 ISE-ATIF ADE-SERVICE[5832]: [18040]:[info] user: install_cli.c[72] [admin]: Illegal characters or double dots not found in name ISE-Repo
2022-03-30T09:08:46.318749+00:00 ISE-ATIF ADE-SERVICE[5832]: [18040]:[info] application:install cars_install.c[807] [admin]: Stage area - /storeddata/Installing/.upgrade
2022-03-30T09:08:46.491293+00:00 ISE-ATIF ADE-SERVICE[5832]: [18040]:[info] transfer: cars_xfer.c[74] [admin]: tftp copy in of ise-upgradebundle-2.6.x-3.0.x-to-3.1.0.518.SPA.x86_64.tar requested
2022-03-30T09:08:46.551320+00:00 ISE-ATIF ADE-SERVICE[5832]: [18040]:[error] transfer: cars_xfer_util.c[221] [admin]: TFTP transfer error: 256
2022-03-30T09:08:46.555719+00:00 ISE-ATIF ADE-SERVICE[5832]: [18040]:[info] transfer: cars_xfer_util.c[2300] [admin]: Properties file /tmp/.cars_repodownload.props does not exist
2022-03-30T09:08:46.557497+00:00 ISE-ATIF ADE-SERVICE[5832]: [18040]:[error] application:install cars_install.c[818] [admin]: Could not get remote bundle ise-upgradebundle-2.6.x-3.0.x-to-3.1.0.518.SPA.x86_64.tar from repo ISE-Repo to prepare for upgrade
2022-03-30T09:08:46.554259+00:00 ISE-ATIF ADEOSShell[18040]: ADEAUDIT 2051, type=APP UPGRADE PREPARATION, name=APP UPGRADE PREPARATION FAILED, username=admin, cause=Application upgrade preparation failed, adminipaddress=192.168.1.2, interface=CLI, detail=Could not get remote application bundle ise-upgradebundle-2.6.x-3.0.x-to-3.1.0.518.SPA.x86_64.tar from repo ISE-Repo
2022-03-30T09:08:46.554651+00:00 ISE-ATIF ADEOSShell[18040]: ADEAUDIT 3022, type=APP UPGRADE PREPERATION, name=APP UPGRADE PREPERATION FAILED, username=admin, cause=Error during application upgrade preparation, adminipaddress=192.168.1.2, interface=CLI, detail=Could not get remote application bundle ise-upgradebundle-2.6.x-3.0.x-to-3.1.0.518.SPA.x86_64.tar from repo ISE-Repo
2022-03-30T09:08:46.580096+00:00 ISE-ATIF ADE-SERVICE[5832]: [18040]:[error] application:install install_cli.c[336] [admin]: error message: File transfer error
2022-03-30T09:08:46.582999+00:00 ISE-ATIF ADE-SERVICE[5832]: [18040]:[error] application:install install_cli.c[340] [admin]: Error while staging - Application bundle: ise-upgradebundle-2.6.x-3.0.x-to-3.1.0.518.SPA.x86_64.tar Repository: ISE-Repo ErrorCode: -302
2022-03-30T09:10:01.978578+00:00 ISE-ATIF ADE-SERVICE[5832]: [20243]:[info] transfer: cars_xfer.c[232] [admin]: not supported - tftp dir of repository ISE-Repo requested
2022-03-30T09:10:01.980903+00:00 ISE-ATIF ADE-SERVICE[5832]: [20243]:[info] backup-restore:history: br_cli.c[363] [admin]: error message: Protocol does not support listing directories
2022-03-30T09:11:30.184270+00:00 ISE-ATIF ADEOSShell[22372]: ADEAUDIT 2039, type=CONSOLE, name=ADEOS_EVENT_CONSOLE_LOGOUT, username=admin, cause=User Logged out of console, adminipaddress=127.0.0.1, interface=CLI, detail=User 'admin' logged out from CLI console tty /dev/tty1
any help will be deeply appreciated
:
