cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
2174
Views
0
Helpful
1
Replies

Now use ISE 3.0, so only use Smart License

Hung_lin
Level 1
Level 1

Hello All
I would like to ask if there are any relevant practices. After reading the guide, I found that the 10,000 sessions purchased cannot be displayed in the ISE License information.

Has anyone set up recommended steps

 

Thanks!

1 Accepted Solution

Accepted Solutions

Damien Miller
VIP Alumni
VIP Alumni

Traditional ISE 2.x licenses are able to be migrated to ISE 3.0 through a licensing TAC case, but the base licenses will become subscription based which require renewal by Oct 31st 2023. Likewise, traditional PAK based ISE 2.x licenses can be migrated to ISE 3.0 smart licensing.
As you mentioned, ISE 3.0 is only able to use smart licensing and will never support traditional PAK licensing. 

There is a licensing migration guide specific to 2.x to 3.0 upgrades here;
https://www.cisco.com/c/en/us/products/collateral/security/identity-services-engine/migration-guide-c07-744240.html

View solution in original post

1 Reply 1

Damien Miller
VIP Alumni
VIP Alumni

Traditional ISE 2.x licenses are able to be migrated to ISE 3.0 through a licensing TAC case, but the base licenses will become subscription based which require renewal by Oct 31st 2023. Likewise, traditional PAK based ISE 2.x licenses can be migrated to ISE 3.0 smart licensing.
As you mentioned, ISE 3.0 is only able to use smart licensing and will never support traditional PAK licensing. 

There is a licensing migration guide specific to 2.x to 3.0 upgrades here;
https://www.cisco.com/c/en/us/products/collateral/security/identity-services-engine/migration-guide-c07-744240.html